Latex, Silicone, Polyurethane

5,925 руб.
2 part PPU foam. Mixing ratio: 100A:45B. 
5 item(s)
+

4,150 руб.
2-part on-skin modelling silicone gel for fast effects. Setting time: 10 minutes. Light translucent flesh color with fibers.
26 item(s)
+

3,950 руб.
Platinum silicone, colorless, translucent. Hardness: 10 Shore A Pot life 20-30 minutes Cure time 40-60 minutes Demold time 2-4 hours...
4 item(s)
+

3,950 руб.
Platinum silicone, colorless, translucent. Hardness: 25 Shore A Pot life 20-30 minutes Cure time 40-60 minutes Demold time 2-4 hours...
10 item(s)
+

3,950 руб.
Platinum silicone, colorless, translucent. Hardness: 40 Shore A Pot life 20-30 minutes Cure time 40-60 minutes Demold time 2-4 hours Low...
16 item(s)
+

3,950 руб.
Platinum silicone, colorless, translucent. Hardness: 00-2 Shore A Pot life 20-30 minutes Cure time 40-60 minutes Demold time 2-4 hours...
11 item(s)
+

2,900 руб.
ENKAPS 500ml acetone soluble cap plastic
23 item(s)
+

2,540 руб.
SOPLEGEN turns your silicone into soft and sticky gel. This product is similar to Slacker by Smooth-On and Smith's Deadener, but not the same. Starter...
76 item(s)
+

1,650 руб.
7 item(s)
+

1,150 руб.
30 item(s)
+

790 руб.
4 item(s)
+

780 руб.
Маленькие. Точные. Экономичные. Удобные. До 500 грамм. Батарейки в комплект  не входят .  
24 item(s)
+

550 руб.
Liquid thixotropic additive for silicone. Use about 0,1-1% by weight. Mixing at high speed is preferable for best result and minimal amount of additive.
5 item(s)
+

370 руб.
1 item(s)
+

3,200 руб.
SUPERENKAPS  film may be dissolver even under eyes (using our special solvent). No more acetone or alcohol under eyes!
Out of stock

Out of stock