Product filters

Stock status

Categories

Solutions Solutions

Latex, Silicone, Polyurethane

Sort by Popularity: Low to High
24 Per Page
Prosthetic gelatine BURNS kit 4 colors 315g
2380  руб.
118 item(s)
+ −
Ultra soft silicone MASKOID00 for animatronic masks and prosthetics 2kg
3950  руб.
Platinum silicone, colorless, translucent. Hardness: 00-2 Shore A Pot life 20-30 minutes Cure time 40-60 minutes Demold time 2-4 hours...
12 item(s)
+ −
Pocket digital scales 0,1/500g
780  руб.
Маленькие. Точные. Экономичные. Удобные. До 500 грамм. Батарейки в комплект  не входят .  
20 item(s)
+ −
Mould Wax Release Fluid GRIMSHOP 500ml
1150  руб.
15 item(s)
+ −
SOPLEGEN - silicone softener for encapsulation 1kg
2540  руб.
SOPLEGEN turns your silicone into soft and sticky gel. This product is similar to Slacker by Smooth-On and Smith's Deadener, but not the same. Starter...
64 item(s)
+ −
Hard silicone MASKOID40 for moulds 2kg
3950  руб.
Platinum silicone, colorless, translucent. Hardness: 40 Shore A Pot life 20-30 minutes Cure time 40-60 minutes Demold time 2-4 hours Low...
15 item(s)
+ −
THIVEXIN silicone thichener liquid thixotropic additive 115g
550  руб.
Liquid thixotropic additive for silicone. Use about 0,1-1% by weight. Mixing at high speed is preferable for best result and minimal amount of additive.
17 item(s)
+ −
ENKAPS 500ml acetone soluble cap plastic
2900  руб.
ENKAPS 500ml acetone soluble cap plastic
30 item(s)
+ −
Prosthetic gelatine FLESH 200g
870  руб.
195 item(s)
+ −
Natural liquid latex 1L for FX masks
1650  руб.
93 item(s)
+ −
Natural liquid latex for make-up 120ml
370  руб.
96 item(s)
+ −
FLEXOPENA-3 soft polyurethane foam 3kg kit
5925  руб.
2 part PPU foam. Mixing ratio: 100A:45B. 
Out of stock
SUPERENKAPS 500ml eye-friendly soluble cap plastic
3200  руб.
SUPERENKAPS  film may be dissolver even under eyes (using our special solvent). No more acetone or alcohol under eyes!
Out of stock
Medium silicone MASKOID25 for props and molds 2kg
3950  руб.
Platinum silicone, colorless, translucent. Hardness: 25 Shore A Pot life 20-30 minutes Cure time 40-60 minutes Demold time 2-4 hours...
Out of stock
Soft silicone MASKOID10 for masks and prosthetics 2kg
3950  руб.
Platinum silicone, colorless, translucent. Hardness: 10 Shore A Pot life 20-30 minutes Cure time 40-60 minutes Demold time 2-4 hours...
Out of stock
Silipasta - on skin direct modelling silicone paste 100g
4150  руб.
2-part on-skin modelling silicone gel for fast effects. Setting time: 10 minutes. Light translucent flesh color with fibers.
Out of stock